Chain plate chip conveyor

1. Sturdy and durable, smooth operation, low noise, and aesthetically pleasing appearance.

2. Steel plate protective covers are suitable for high-speed machine tool guide rail protection, providing stability and vibration-free, noise-free operation.

3. The steel plate protective cover device not only extends the service life of the protective plates but, more importantly, ensures the precision of the machine tool.

4. Each section of the steel plate protective cover can be pulled out and retracted simultaneously and in parallel, allowing for smooth and flexible operation.

5. The steel plate protective cover prevents the protective plates from disconnecting or producing impact noises, enhancing both aesthetics and the service life of the protective plates.

6. In addition to the original sealing strip, a stainless steel cover plate is added to prevent iron chips from burning the sealing strip at high temperatures and scratching the guide rail surface.

Advantages of the steel plate protective cover device:

1. Each piece of the protective cover can move simultaneously and in sync, unlike the typical pull-type covers where pieces move one after another, resulting in extremely low noise.

2. The use of this device can extend the service life of the protective cover.

3. The steel plate protective cover device allows the protective cover to achieve a movement speed of up to 120 m/min and withstand higher G-forces (2G).

4. The steel plate protective cover device ensures that the protective cover moves synchronously and in parallel (avoiding the serpentine movement typical of shear-type protective covers).

5. It provides greater stability at high speeds without generating vibrations.

Steel Plate and Stainless Steel Plate Machine Tool Guide Rail Protective Covers

Steel telescopic guide rail protective covers are a traditional form of protection for machine tools. In this field, steel telescopic guide rail protective covers are widely used, effectively preventing chips and other sharp objects from entering. With certain structural measures and suitable scrapers, they can also effectively reduce the infiltration of coolant. Our factory's steel telescopic guide rail protective covers can meet the increasing demands of modern machine tools for high technology, correct installation positioning, and high operating speeds.

Technical Data

Steel telescopic guide rail protective covers are made from high-quality 2-3 mm thick cold-pressed steel plates and can also be made from stainless steel upon request. Special surface polishing adds additional value. We can provide corresponding guide rail protective types (horizontal, vertical, inclined, transverse) for all types of machine tools.

The structure of the protective covers we develop varies depending on the operating speed and guide rails. For operating speeds below 10 m/min, we install polyurethane or brass sliders. For medium speeds below 30 m/min, we install rollers. Additionally, a buffer system is required between the drive plate, scraper plate, and chip suction plate. The purpose of the slider buffer system is to reduce collisions, noise, and friction.

The number of sections in a steel telescopic guide rail protective cover is crucial to its proportion, weight, and operating characteristics. Each individual section should be as long as possible to reduce the number of sections and lower costs. Generally, the maximum extension-to-minimum compression ratio should be between 3:1 and 5:1.