Steel plate protective cover

1. Sturdy and durable, smooth operation, low noise, and aesthetically pleasing appearance.

2. The steel plate protective cover is suitable for high-speed machine tool guideway protection, offering both stability and vibration-free, low-noise operation.

3. The steel plate protective cover device not only extends the service life of the guard plates but, more importantly, ensures the precision of the machine tool.

4. Each section of the steel plate protective cover opens and retracts simultaneously and in parallel, allowing for smooth and free movement.

5. The steel plate protective cover prevents the guard plates from disconnecting or producing impact sounds, enhancing both aesthetics and the service life of the guard plates.

6. Based on the original sealing strip, an additional stainless steel cover plate is added to prevent iron chips from burning the sealing strip at high temperatures and scratching the guideway surface. Advantages of the steel plate protective cover device:

1. The tension-rib type protective cover allows each plate to move simultaneously and in sync, unlike conventional covers that pull one plate after another, resulting in lower noise.

2. The tension-rib device in the protective cover helps extend its service life.

3. The tension-rib steel plate protective cover device enables the cover to achieve a movement speed of up to 120 m/min and withstand higher G-forces (2G).

4. The tension-rib steel plate protective cover device ensures synchronized and parallel movement of the cover (avoiding the serpentine movement typical of shear-type protective covers).

5. The tension-rib steel plate protective cover provides greater stability at high speeds without generating vibrations.

Steel and Stainless Steel Machine Tool Guideway Protective Covers

Steel telescopic guideway protective covers are a traditional form of protection for machine tools. In this field, steel telescopic guideway protective covers are widely used, providing effective protection against chips and other sharp objects. Through specific structural measures and suitable scrapers, they can also effectively reduce the infiltration of coolant. Our factory's steel telescopic guideway protective covers can meet the increasing demands of modern machine tools for high technology, precise installation positioning, and high operating speeds.

Technical Data

Steel telescopic guideway protective covers are made from high-quality 2-3 mm thick cold-pressed steel plates and can also be made from stainless steel upon request. We can provide corresponding guideway protective types (horizontal, vertical, inclined, transverse) for all types of machine tools.

The structure of the protective cover we develop varies depending on the operating speed and guideway type. For operating speeds below 10 m/min, we equip them with polyurethane or brass sliders. For medium speeds below 30 m/min, we use rollers. Additionally, a buffer system is required between the drive plate, scraper plate, and chip suction plate. The purpose of the slider buffer system is to reduce collisions, noise, and friction.

The number of sections in a steel telescopic guideway protective cover is crucial to its proportion, weight, and operating characteristics. Each individual section should be as long as possible to reduce the number of sections and lower costs. Generally, the ratio of maximum extension to minimum compression should be between 3:1 and 5:1.